Actions
Torque execution configuration discussion » History » Revision 3
« Previous |
Revision 3/5
(diff)
| Next »
Nguyen Cao Nguyen, 09/07/2026 01:21 PM
Torque execution configuration discussion¶
Spec: Tolerance +/-4 % target torque | Status: WIP¶
TV5
Tighten: access code {5,5,1,1} → SCREEN_CFG_TORQUE_TIGHTEN_WARN_TOLERANCE
Over: access code {5,5,2,1} → SCREEN_CFG_TORQUE_OVER_WARN_TOLERANCE
#define GOOD_TORQUE_ZONE_LIMIT_L_DEFAULT 100 // Config & Store in Flash mode Code: {5,5,1,1}
#define OVER_TORQUE_ZONE_LIMIT_L_DEFAULT 115 // Config & Store in Flash mode Code: {5,5,2,1}
Reference¶
Updated by Nguyen Cao Nguyen 22 days ago · 5 revisions